Water column light use guide

1. Selection and preparation

Selection

Water column lamp, as a unique water lighting equipment, can not only enhance the viewing of the night landscape, but also create a fantastic visual effect. When choosing a water column lamp, consider the following factors:

** Light source Type ** : LED is the most commonly used and energy-efficient light source, and it is necessary to pay attention to its color temperature (warm white, cold white, etc.), brightness and waterproof level when selecting.
** Power and height ** : According to the height of the required water column and visual effect, choose the appropriate power of the lamp. In general, the higher the power, the higher and brighter the water column.
** Control mode ** : divided into manual control and intelligent control (such as DMX control, wireless remote control, etc.), according to the actual application scenarios and needs to choose.
** Appearance and material ** : Consider the coordination of the appearance of the lamp and the overall landscape, as well as the corrosion resistance of the material, to ensure that the long-term use of no deformation, no fading.

Ready

** Confirm requirements ** : Specify the installation area, expected effect and budget.
** Purchase accessories ** : In addition to the water column lamp body, it is necessary to prepare the necessary accessories, such as power supply, controller, cable, waterproof connector, etc.
** Tools ** : Installation and commissioning tools such as electric drill, screwdriver, insulation tape, and multimeter.

2. Determine the installation position

** Safety assessment ** : Check whether the installation area is stable and away from crowded areas to ensure safety.
** Water level consideration ** : According to the water depth range of the design of the water column lamp, choose the appropriate installation depth to avoid affecting the lighting effect or damaging the lamp.
** Visual effects ** : Considering the landscape layout, choose the location that can best show the effect of water column light shadow.

3. Wiring and connection

** Line planning ** : According to the installation position, reasonably plan the cable line direction, as far as possible to hide and avoid crossing.
** Waterproof treatment ** : All cable joints must be waterproofed and sealed with waterproof joints or insulation tape.
** Connecting equipment ** : Correctly connect the water column lamp, power supply, controller, etc., according to the instructions, pay attention to the positive and negative poles can not be reversed.

4. Debugging and testing

** Check before power-on ** : confirm once again that all connections are correct, no exposed lines, and waterproof measures are in place.
** Preliminary commissioning ** : Gradually turn on the power supply, observe whether the water column lamp emits light normally, adjust the controller parameters, such as brightness, color, water column height, etc., until the ideal effect is achieved.
** Long time test ** : Run continuously for a period of time to observe the stability and temperature of the lamp to ensure that there is no abnormality.

Daily maintenance

** Regular inspection ** : Check the lamps and wiring at least once a month, clean the surface dirt of the lamps, and check the waterproof tightness.
** Cleaning and maintenance ** : Use a soft cloth to gently wipe the lamp shell, avoid using chemical cleaners.
** Replacement parts ** : Replace damaged or aged parts in a timely manner, especially waterproof gaskets and cable joints.

6. Safety precautions

** Waterproof and moisture-proof ** : Ensure that all electrical components have sufficient waterproof rating to prevent short circuit caused by water intrusion.
** Insulation protection ** : Wear insulation gloves during operation to avoid direct contact with exposed wires.
** Power off operation ** : When repairing or adjusting the lamp, be sure to cut off the power first.
** Warning for children ** : Warning signs should be set up in the installation area to prevent children from touching it by mistake.

7. Troubleshooting

** Troubleshooting ** : Use a multimeter to check whether there is a problem with the power input, controller output and the lamp itself.
** Simple maintenance ** : If the lamp is damaged, waterproof gasket aging and other simple faults, can be replaced by themselves.
** Professional maintenance ** : Complex faults or problems involving electrical safety should be handled by professional maintenance personnel.

With the above steps, you can effectively install, use and maintain water column lights to add a beautiful landscape.

Blog